| CNC 2-Spindle 2-Turret Precision Lathe XY-1000 |
| CNC 2-Spindle 2-Turret Precision Lathe XY-1000 |
| ■ | Wide Range of Milling with the Y-axis Function |
| Incorporating the Y-axis function in the dual spindle dual turret lathe allows for performance equal to that of two machines. With the addition of power tools like end mills, drills, and taps, revolutionary multi-axis control 3-D machining is realized. |
|
| ■ | Two Cutting Operations at Once ! Machining Variations Are Widened |
| By positioning two turrets vertically, simultaneous cutting of the same workpiece with two turrets can be performed in a short cycle time with high accuracy. |
|
| ■ | Ample Power and Storage of Power Tools |
| The high-speed servo turret incorporated with power tool units shortens idle time, and an AC3.7kW-drive motor is used for power tools, achieving high-power machining. Up to 12 power tools (on both turrets) can be installed. These tools increase machining capacity and are especially useful for extended unmanned operation. |
|
Item
|
Unit
|
Primary/Secondary Spindle | |
| Chuck size |
inch
|
6
|
|
| Spindle bearing I.D. |
mm
|
φ85
|
|
| Spindle speed |
min-1
|
Max.5,000
|
|
| Tool post type |
|
12-station
|
|
| Max. stroke |
mm
|
X:162.5(160: #2 turret)
Z:450 Y:±30 A:475 |
|
| Rapid traverse rate |
m/min
|
X:18 Z:24 Y:12 A:30
|
|
| Spindle motor |
kW
|
AC7.5/5.5
|
|
| L×W |
mm
|
2,950×2,015
|
|
| Controller |
|
TAKAMAZ&FANUC
|
|