| CNC Precision Lathe XY-120 |
| Power tool | |
| Tool storage capacity |
12 pcs
|
| Motor |
AC/3.7/2.2/1.5kW
|
| CNC Precision Lathe XY-120 |
| Power tool | |
| Tool storage capacity |
12 pcs
|
| Motor |
AC/3.7/2.2/1.5kW
|
| ■ | Diverse milling capabilities enable efficient milling/turning operations. |
| The 12-station turret assures high-speed indexing, within 0.2sec., which shortens air-cutting time. Power tools can be mounted on any station of the turret. The 3.7kW AC motor, with its wide constant-output range, enables powerful milling/drilling in a short cycle time. |
|
| ■ | Diverse milling capabilities with a Y-axis function |
| The Y-axis function enables you to perform side milling or offset grooving with a single chucking operation. Precise positioning accuracy meets the sever requirements for quality products. |
|
| ■ | Complete turning from blank to finish when equipped with sub-spindle (Opt.) |
| A collet chuck or 5-inch chuck can be mounted. Back-face turning/milling in a short time is assured thanks to the 3.7kW AC motor with a wide constant-output range. Back-face milling with a Cs-axis orientation is also possible. |
| Item |
Unit
|
Main Spindle
|
Sub-Spindle
|
|
| Chuck size |
inch
|
Collet、6
|
Collet、5
|
|
| Spindle bearing I.D. |
mm
|
φ75
|
(φ85 Opt.)
|
φ65
|
| Spindle speed |
min-1
|
Max.4,500
(6,000 Opt.) |
(Max.4,500 Opt.)
|
Max.4,500
(6,000 Opt.) |
| Tool post type |
|
12-station
|
||
| Max. stroke |
mm
|
X：150 Z：330 Y：±30 A：380
|
||
| Rapid traverse rate |
m/min
|
X：18 Z：24 Y：12 A：18
|
||
| Spindle motor |
kW
|
AC5.5/3.7（7.5/5.5 Opt.）
|
AC3.7/2.2
|
|
| L×W |
mm
|
2,400×1,650
|
||
| Controller |
|
TAKAMAZ&FANUC
|
||